493. Convenient Features• ALERT MAILALERT MAIL (Englishonly)This option will notify your computer of lamp replace time or error messages via e-mailwhen using wireless or wired LAN.Placing a checkmark will turn on the Alert Mail feature.Clearing a checkmark will turn off the Alert Mail feature.Sample of a message to be sent from the projector:The lamp and filters are at the end of its usable life. Please replace the lamp andfilters.Projector Name: NEC ProjectorLamp Hours Used: 100 [H]SENDER’S ADDRESS Enter sender’s address.SMTP SERVER NAME Enter the SMTP server name to be connected to the projector.RECIPIENT’S ADDRESS1,2,3Enter your recipient’s address. Up to three addresses can be entered.TEST MAIL Send a test mail to check whether your settings are correct or notNOTE:• If you execute a test, you may not receive an Alert mail. Should this happen, check if networksettings are correct.• If you entered an incorrect address in a test, you may not receive an Alert mail. Should thishappen, check if the Recipient’s Address is correct.SAVE Click this button to reflect the above settings.• NETWORK SERVICEPJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forgetyour password. However, if you forget your password, consult with your dealer.HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less.AMX BEACON Turn on or off for detection from AMX Device Discovery when connecting to the networksupported by AMX’s NetLinx control system.TIP:When using a device that supports AMX Device Discovery, all AMX NetLinx control system will rec-ognize the device and download the appropriate Device Discovery Module from an AMX server.Placing a checkmark will enable detecting the projector from AMX Device Discovery.Clearing a checkmark will disable detecting the projector from AMX Device Discovery.*What is PJLink?PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard proto-col is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.The projector supports all the commands of PJLink Class 1.Setting of PJLink will not be affected even when [RESET] is done from the menu.• INFORMATIONWIRED LAN Display a list of settings of wired LAN connection.WIRELESS LAN Display a list of settings of wireless LAN connection.UPDATE Reflect settings when they are changed.
