363. Convenient FeaturesNOTE:• When [COMPUTER 1] is selected from your source selection, the Virtual Remote screen or the toolbar will be displayed as wellas your computer screen.• Use the supplied computer cable (VGA) to connect the COMPUTER 1 IN connector directly with the monitor output connector ofthe computer to use Virtual Remote Tool.Using a switcher or other cables than the supplied computer cable (VGA) may cause failure in signal communication.VGA cable connector:Pin Nos. 12 and 15 are required for DDC/CI.• Virtual Remote Tool may not work depending on your computer’s specifications and version of graphic adapters or drivers.• To run Virtual Remote Tool on Windows XP Home Edition and Windows XP Professional, “Microsoft .NET Framework Version2.0 or later” is required. The Microsoft .NET Framework Version 2.0 or later is available from Microsoft’s web page. Downloadand install the it on your computer.• Logo data (graphics) that can be sent to the projector with Virtual Remote Tool has the following restrictions:(Only via serial or LAN connection)- File size: 64 KB or less- Image size (resolution): Horizontal 699 dots × vertical 499 dots or less- Number of colors: 256 colors or less• The logo data that is sent with Virtual Remote Tool will be displayed at the center of the screen. Its surrounding will be paintedout in the same color as one for 1 dot at top left.TIP:• The projector’s COMPUTER 1 IN connector supports DDC/CI (Display Data Channel Command Interface). DDC/CI is a standardinterface for bidirectional communication between display/projector and computer.Step 1: Install Virtual Remote Tool on the computerNOTE:• To install Virtual Remote Tool, the Windows user account must have “Administrator” privilege (Windows 7, Windows Vista andWindows XP).• Exit all running programs before installing Virtual Remote Tool. If another program is running, the installation may not be com-pleted.1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive.The menu window will be displayed.
