NEC HT410 User Manual

Also see for HT410 Series: Supplementary guide Control commands Command guide Command guide Control commands

Contents

NEC HT410 User Manual Manual pdf 28 page image

E-17AUDIO INL RAUDIO OUTL RVIDEO OUTS-VIDEO VIDEOPC CONTROLCOMPONENT INCOMPUTER INAUDIO INCr/PrCb/PbYAC INVIDEO INS-VIDEO INRL/monoAUDIO INS-VIDEO IN AUDIO INVIDEO INConnecting Your VCR or Laser Disc PlayerAudio equipmentAudio cable(supplied)Use S-Video or RCA cables (provided) to connect your VCR, laser disc player or document camera to yourprojector.To make these connections, simply:1. Turn off the power to the projector and VCR, laser disc player or document camera.2. Connect one end of your RCA or S-Video cable to the video output connector on the back of your VCR or laserdisc player, connect the other end to the Video input on your projector. Use an audio cable (supplied) toconnect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc playerhas this capability). Be careful to keep your right and left channel connections correct for stereo sound.3. Turn on the projector and the VCR or laser disc player.NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video outputrequirements.NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewindvia a scan converter.S-Video cable (supplied)Composite video cable (supplied)VCR/ Laser disc player2. INSTALLATION AND CONNECTIONS