NEC HT410 User Manual

Also see for HT410 Series: Supplementary guide Control commands Command guide Command guide Control commands

Contents

NEC HT410 User Manual Manual pdf 15 page image

E-4Top FeaturesLAMPSTATUSPOWERSOURCEAUTOADJ.ON/STAND BYSELECT3245 871 6 9 101. INTRODUCTION1. ON/STAND BY button ( )Use this button to turn the power on and off when the main power is supplied and the projector is in standbymode.To turn on the projector, press and hold this button for a minimum of two seconds. To turn off the projector,press this button twice.2. POWER indicatorWhen this indicator is green, the projector is on; when this indicator is orange, it is in standby mode. See thepower Indicator section on page E-49 for more details.3. STATUS indicatorIf this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly orthe projector has overheated. If this light remains orange, it indicates that you have pressed a cabinet keywhile the Cabinet Button is locked. See the Status Indicator section on page E-49 for more details.4. LAMP indicatorIf this light blinks red rapidly, it’s warning you that the lamp has reached the end of its usable life. After this lightappears, replace the lamp as soon as possible (See page E-45). See the Lamp Indicator section on page E-49 for more details.5. SOURCE buttonThis button will allow you to select a video source such as a PC, VCR or DVD player.Press and quickly release this button to display the Source list. Each time this button is pressed, each sourcename will be highlighted in sequence. Highlighting a source name for 2 seconds without pressing the ENTERbutton will display the selected source.6. AUTO ADJ. buttonUse this button to adjust an RGB source for an optimal picture (See page E-27).7. MENU buttonDisplays the menu.8. SELECT / volume +/- buttons : Use these buttons to select the menu of the item you wish to adjust. : Use these buttons to change the level of a selected menu item. When no menus appear, these buttonswork as a volume control.9. ENTER buttonExecutes your menu selection and activates items selected from the menu.10. EXIT buttonPressing this button will return to the previous menu.While you are in the main menu, pressing this button will close the menu.