Troubleshooting 7-23SOLVING PROBLEMSWhen the server fails to operate as expected, see the following to find out your problem and followthe given instruction before asking for repair.If the server still fails to operate successfully after solving your problem, take a note on theon-screen message and contact your sales agent.Problems with NEC Express5800/ft seriesFail to power on the server: Is the server properly supplied with power?→ Check if the power cord is connected to a power outlet (or UPS) that meets thepower specifications for the server.→ Check if the two pieces of the provided power cord are connected to the main unitproperly.→ Make sure to use the power cord provided with the server. Check the power cordfor broken shield or bent plugs.→ Make sure the power breaker for the connected power outlet is on.→ If the power cord is plugged to a UPS, make sure the UPS is powered and itsupplies power. See the manual that comes with the UPS for details.Power supply to the server may be linked with the connected UPS using the BIOSsetup utility of the server.
