NAD T785 HD Owner's Manual

Also see for T785: Catalog Specification sheet Owner's manual Specifications Owner's manual

NAD T785 HD Owner's Manual Manual pdf 9 page image

10 VOLUME : Use this control to adjust the volume level of the mainspeakers. The default volume level is -20dB. The VOLUME knob is alsoused to increment / decrement other adjustable parameters like ToneControls.11 A SPEAKERS B : Press either speaker A or B or both to select theset of speakers you wish to listen to. Speaker A is the main set of 7multichannel and surround speakers. Speaker B is an auxiliary setfor remote locations such as other rooms of your home. For SpeakerB selection, all surround sound sources are downmixed to stereo.Combining Speaker A and Speaker B (SPEAKERS A + B) will also result tothe source being downmixed to stereo.12 SOURCE : Press these buttons to toggle through the inputselections – Source 1, Source 2, Source 3, Source 4, iPod, Source 7,Front Input, Media Player and Tuner (AM, FM, XM, DAB as applicable).More Sources could be directly recalled through these buttons uponenabling them at the Setup Menu (See the section ‘Source Setup’ atSetup Menu discussion).13 LISTENING MODE: Toggle to select through the various Listeningmode options. Depending on the format of the currently selected input(digital or analog, stereo or multichannel), various listening modes areavailable. Refer also to the item about LISTENING MODE under theUSING THE T 785 – MAIN MENU segment of the OPERATION section.14 TONE CONTROLS : Press to adjust TREBLE control using the VOLUMEknob over a ± 10dB range. Press again to adjust BASS control and a thirdtime for DIALOG control. See also section about ‘Tone Controls’ under‘Main Menu’ discussions.15 TONE DEFEAT : Tone Controls are enabled or disabled by pressingthis button. Tone controls are bypassed at ‘Tone Defeat’ while at ‘ToneActive,’ the tone controls are enabled again. See also section about ‘ToneControls’ under ‘Main Menu’ discussions.16 FRONT INPUT/MP : Use this button to directly select Front Input andMedia Player. Toggle button to switch between Front Input and MediaPlayer input.17 PHONES : Accepts stereo headphone using a standard 1/4-inch stereophone plug (use a suitable adapter for headphones equipped with asmaller plug). For headphone listening, the Front speakers must be setto “Large” at the ‘Speaker Configuration’ of the Speaker Setup item atthe Setup Menu, otherwise headphone bass response will be restricted.Plugging in headphones will automatically switch the T 785 to Stereo,Stereo Downmix or Analog Bypass modes.18 FRONT INPUT jacks : Use these convenience jacks for occasionalsources such as a camcorder, tape player, video game console, anyanalog audio or optical digital audio and composite or S-Video videosources. If your source has a single audio out jack only or is marked‘mono output’ , plug this into the T 785’s Front ‘R (Mono)’ input. On theother hand, if your source has two output jacks indicative of stereooutput, insert both jacks into the T 785’s corresponding Front ‘L’ and ‘R(Mono)’ input to achieve stereo output as well.19 MP/MIC input : Connect your MP3’s standard stereo phone jack tothis input. This is the same input where Audyssey microphone jack isconnected (See also discussion about ‘Audyssey Auto Calibration’).IDENTIFICATION OF CONTROLSFRONT PANEL9ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ