Mitsubishi Electric ERNT-CQB051N User Manual

Mitsubishi Electric Programmable ControllerUpgrade ToolBase AdapterModelERNT-CQB081NERNT-CQB051NERNT-CQB031NUser’s Manual50CM-D180422-A(1811)HEAD OFFICE: Hulic KUDAN BLDG.1-13-5, KUDANKITA CHIYODA-KU, TOKYO 102-0073, JAPANNAGOYA ENGINEERING OFFICE:139 SHIMOYASHIKICHO-SHIMOYASHIKI, KASUGAI, AICHI 486-0906, JAPANSAFETY PRECAUTIONS(Always read these precautions prior to use.)Before using this product, please read this manual carefully and pay full attention to safetyto ensure that the product is used correctly.The precautions presented in this manual are concerned with this product only. ForProgrammable Controller system safety precautions, refer to the following manuals.・MELSEC-Q series: QCPU User’s Manual (SH-080483ENG)・MELSEC iQ-R series: Safety Guidelines (IB-0800525E)If the equipment is used in a manner not specified by the manufacturer, the protectionprovided by the equipment may be impaired.In this manual, the safety precautions are ranked as “WARNING” and “CAUTION.”WARNINGIndicates that incorrect handling may causehazardous conditions, resulting in death or severeinjury.CAUTIONIndicates that incorrect handling may causehazardous conditions, resulting in medium or minorinjury and/or property damage.Note that failure to observe the CAUTION level instructions may lead to a seriousconsequence according to the circumstances. Always follow the precautions of both levelsbecause they are important to personal safety.Please keep this manual in an easy-to-access location for future reference, and be sure toprovide the manual to the end user.[Installation Precautions]WARNING● Be sure to shut off all phases of the external power supply beforeperforming installation work. Failure to do so could result in electric shockor product damage.CAUTION● Use the base adapter in the environmental conditions that are specified inthe general specification in the following manuals. Failure to do so couldlead to electric shock, fire, malfunction or product failure or deterioration.・MELSEC-Q series: QCPU User’s Manual (SH-080483ENG)・MELSEC iQ-R series: Safety Guidelines (IB-0800525E)● Fully secure the base adapter, Programmable Controller base unit(MELSEC-Q Series, MELSEC iQ-R Series), and conversion adapter anchorbase using the installation screws, and securely tighten the screws withinthe specified torque range. Failure to do so could cause the product to fall,resulting in damage.[Startup and Maintenance Precautions]WARNING● Be sure to shut off all phases of the external power supply before cleaningand retightening the installation screws. Failure to do so could lead toelectric shock. Excessively tightened screws could result in damage,causing the product to fall, a short circuit or product malfunction.[Disposal Precautions]CAUTIONWhen disposing of the product, treat it as industrial waste.● 安全注意事项 ●(使用前请务必阅读)使用本产品时，请仔细阅读本手册，并充分注意安全，正确地使用产品。本手册中标注的注意事项仅记载了与本产品相关的内容。关于可编程控制器系统的安全注意事项，请参阅下述手册。・MELSEC-Q series: QCPU User’s Manual (SH-080483ENG)・MELSEC iQ-R series: Safety Guidelines (IB-0800525E)在本●安全注意事项●中，安全注意事项的等级分为「警告」和「注意」。警告表示错误操作可能造成危险后果，引起死亡或重伤事故。注意表示错误操作可能造成危险后果，引起中度伤害，轻伤及财产损失。另外，根据情况不同，即使是注意中记载的事项，也可能引发严重后果。不管哪个记载的都是非常重要的内容，请务必遵守。请妥善保管本手册，以便需要时取阅，并请将本手册交给最终用户。【安装注意事项】警告必须将外部供应全相断开断开后再进行安装作业等。如果未全相断开,可能会导致触电或产品损坏。注意基板适配器被要求在下面手册里所记载的一般规格环境下使用。如果在一般规格范围以外的环境中使用，可能导致触电、火灾、误动作、产品的损坏或劣化。・MELSEC-Q series: QCPU User’s Manual (SH-080483ENG)・MELSEC iQ-R series: Safety Guidelines (IB-0800525E)基板适配器及所使用的可编程控制器模块基板(MELSEC-Q 系列，MELSEC iQ-R 系列)应通过安装螺钉切实加以固定，安装螺钉应在规定的扭矩范围内切实地拧紧。可能因掉落而导致破损。【启动和维护注意事项】警告在清扫或重新紧固端子螺栓时, 必须将外部供应全相断开断开后再进行。如果未全相断开, 可能会导致触电。如果螺栓拧得过紧, 可能会造成转换适配器或输入/输出模块的破损从而导致掉落、短路或误动作。【废弃注意事项】注意废弃时请将本产品作为工业废弃物处理。1．OverviewThis manual describes the Mitsubishi Electric Programmable Controller Upgrade tool baseadapter (ERNT-CQB031N, ERTN-CQB051N, ERNT-CQB081N).The base adapter is a product that enables MELSEC-Q series or MELSEC iQ-R seriesinstallation using the SYSMAC C series installation holes. (Additional hole machining notrequired)Once you have opened the packaging, verify that it contains the following products.Product Shape QtyBase adapter 1Base unit installation screws (M4 x 8) 4This manual － 1２．Product Specifications(1) SYSMAC C Series → MELSEC-Q SeriesBase adapterModelSpecificationsSYSMAC CSeriesCompatible ModuleMELSEC-QSeriesCompatible ModuleInstallableConversion AdapterAnchor BaseWeight(g)ERNT-CQB081NC500-BC081/082C500-BC091C2000-BC061Q312B ERNT-QF12ERNT-QF8892Q38B ERNT-QF8C500-BI081C2000-BI083Q612B ERNT-QF12ERNT-QF8Q68B ERNT-QF8ERNT-CQB051NC500-BC051/052C500-BC061Q38B ERNT-QF8ERNT-QF5710Q35B ERNT-QF5C500-BI051Q68B ERNT-QF8ERNT-QF5Q65BQ55B ERNT-QF5ERNT-CQB031N C500-BC031 Q35BQ33B ERNT-QF5 542(2) SYSMAC C Series → MELSEC iQ-R SeriesBase adapterModelSpecificationsSYSMAC CSeriesCompatible ModuleMELSEC iQ-RSeriesCompatible ModuleInstallableConversion AdapterAnchor BaseWeight(g)ERNT-CQB081NC500-BC081/082C500-BC091C2000-BC061R312B ERNT-1CR12FERNT-1CR8F892R38B ERNT-1CR8FC500-BI081C2000-BI083R612B ERNT-1CR12FERNT-1CR8FR68B ERNT-1CR8FERNT-CQB051NC500-BC051/052C500-BC061R38B ERNT-1CR8FERNT-1AR5F710R35B ERNT-1AR5FC500-BI051 R68B ERNT-1CR8FERNT-1AR5FR65B ERNT-1AR5FERNT-CQB031N C500-BC031 R35B ERNT-1AR5F 5423．Mounting and Installation3.1 Handling Precautions(1) Do not drop or apply heavy impact to the base adapter. Doing so couldresult in damage.(2) Fully secure the MELSEC-Q Series or MELSEC iQ-R Series base unit andconversion adapter anchor base using the installation screws, andsecurely tighten the screws within the specified torque range. Loosescrews could cause a short circuit, fire or malfunction.Screw Location Tightening TorqueRangeBase unit installation screw (M4 screw) 1.39 to 1.89N･mConversion adapter anchor base installation screw (M4 screw)3.2 Installation EnvironmentRefer to the manual supplied with the MELSEC-Q Series or MELSEC iQ-RSeries module you use.・MELSEC-Q series: QCPU User’s Manual (SH-080483ENG)・MELSEC iQ-R series: Safety Guidelines (IB-0800525E)4．Installation Dimensions(1) The width dimension is smaller than that of the SYSMAC C series.(2) The base adapter installation holes (4 locations) have the same installationdimensions as those of the SYSMAC C series base unit. There is no need foradditional screw hole machining on the control panel. <(Reference) SYSMAC C Series>50 150 (50)250(C)AC B50 150 (24)224B (C)ACＣＰＵPowerSupplyI/OI/OI/OI/OI/OI/OI/OI/OCPUPower SupplyBase Adapter Model A B C SYSMAC C SeriesBase Model A B CERNT-CQB081N 480 465 7.5C500-BC081/082 480 465 7.5C500-BC091 486 465 10.5C500-BI081 480 465 7.5C2000-BC061 480 465 7.5C2000-BI083 480 465 7.5ERNT-CQB051N 375 360 7.5C500-BC051/052 375 360 7.5C500-BI051 375 360 7.5C500-BC061 381 360 10.5ERNT-CQB031N 276 255 10.5 C500-BC031 276 255 7.5Installation PrecautionsCheck the installation locations of the base unit and conversion adapteranchor base and install them in the correct locations. Failure to do so couldcause damage on the Conversion Adapters and modules.5．Base Unit and Conversion Adapter AnchorBase Installation Locations5.1 ERNT-CQB081N(1) When installing the MELSEC-Q Series Base unitBERNT-QF12ERNT-QF8a ba bA①Conversion AdapterAnchor BaseBase UnitERNT-QF12 ERNT-QF8Q312BA A① ①b bQ38B －A①bQ612BB B① ①a aQ68B －B①aUpper stage: MELSEC-Q Base unit installation locationIntermediate state: Conversion adapter anchor base installation locationLower stage: Conversion adapter anchor base screw tightening location(2) When installing the MELSEC iQ-R Series Base unitB③ ④ERNT-1CR12FERNT-1CR8Fa ba bAConversion AdapterAnchor BaseBase UnitERNT-1CR12F ERNT-1CR8FR312BA A③ ③a aR38B －A③aR612BB B④ ④b bR68B －B④bUpper stage: MELSEC iQ-R Base unit installation locationIntermediate state: Conversion adapter anchor base installation locationLower stage: Conversion adapter anchor base screw tightening location

/ 2

Related manuals for Mitsubishi Electric ERNT-CQB031N