Menu
Manitowoc Multiplex 42MA04 Installation, Operation And Maintenance Manual
                                                    | |
Contents
| 
Part Number 020002365 08/25/2015 25Section 2 InstallationROUTING INSULATED CONDUIT1. Before connecting conduit, evaluate store situation andlay out how the conduit will be routed. Be sure to routeconduit away from traffic areas, moving parts, and heatsources.2. Physically route conduit per evaluated plan. Examineconduit routing and check for neatness, kinks, andinterferences.CONNECTING INSULATED CONDUIT AT THE UNITNOTE: List what color line was connected to which productso it can be connected correctly at the towers.1. Route the conduit to the front opening and into theunit. Cut the insulation back from the lines inside thewater bath.2. Connect the circulating water by connecting one lineto the circulating pump outlet line (3/8” barb) andclamp in place. Connect the other line to the bulkheadreturn fitting located by the agitator motor (3/8” barb)and clamp in place.CONNECTING INSULATED SUPPLY LINESConnecting the insulated beverage conduit at therefrigeration unit1. Route the Multipar beverage conduit from therefrigeration unit to the dispensing station(s) accordingto the instructions enclosed with the conduit kit.Always route the conduit in a neat and orderly manner.2. Insert the Multipar conduit into the outlet openingon the left hand side of unit. Conduit insulation mustextend inside of opening in unit for proper operation ofequipment.InsulatedBeverageConduitNOTE: Multipar conduit is color coded for easy identificationof lines. When making connections always attach linesrequiring the longest connection from the insulation first.The remaining lines can be trimmed as required to makethe routing neat and secure.3. Locate the two blue carbonated water lines of theMultipar conduit. Attach one of the blue lines to the teefitting located on top of the carbonator tank. Attachthe other blue line to John Guest elbow fitting on thestainless coil labeled “8”.4. Locate the black plain water line of the Multiparconduit. Attach this line to the elbow fitting on thestainless coil labeled “W”.5. The remaining lines of the Multipar conduit are syrupsupply lines and must be attached to the appropriateelbow fittings on stainless steel syrup coils. Note thenumbered lines attached to the opposite end of eachsyrup coil when making connections. |
This manual is suitable for:
Multiplex 42 MR04Multiplex 42MA04Multiplex 42MAX04Multiplex 42MRX04Multiplex 42MW04Multiplex 42MWX04Multiplex 44EAX04TMultiplex 44EWX04TMultiplex 44GA04Multiplex 44GAX04TMultiplex 44GR04Multiplex 44GRX04TMultiplex 44GW04Multiplex 44GWX04TMultiplex 44MA04Multiplex 44MAX04TMultiplex 44MR04Multiplex 44MRX04TMultiplex 44MW04Multiplex 44MWX04TMultiplex 50GAX04Multiplex 50GR04Multiplex 50GR04Q/TMultiplex 50GRX04Multiplex 50GW04Multiplex 50GWX04Multiplex 50MA04Multiplex 50MAX04Multiplex 50MR04Multiplex 50MR04Q/TMultiplex 50MRX04Multiplex 50MW04Multiplex 50MWX04Multiplex SC1000AMultiplex SC1000AXMultiplex SC1000RMultiplex SC1000RXMultiplex SC1000WMultiplex SC1000WXMultiplex SC2000AMultiplex SC2000AXMultiplex SC2000RMultiplex SC2000RXMultiplex SC2000WMultiplex SC2000WX
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved