Manitowoc Chiplet QC0700 Installation, Use & Care Manual

Also see for QC0700: Service manual Building instructions Service manual Technician's handbook

Contents

Manitowoc Chiplet QC0700 Installation, Use & Care Manual Manual pdf 37 page image

Section 3 Ice Machine OperationPart Number 000002688 3-5CLEANING THE CONDENSERAir-Cooled Condenser(SELF-CONTAINED AND REMOTE MODELS)A dirty condenser restricts airflow, resulting inexcessively high operating temperatures. This reducesice production and shortens component life. Clean thecondenser at least every six months. Follow the stepsbelow.1. The washable aluminum filter on self-contained icemachines is designed to catch dust, dirt, lint andgrease. This helps keep the condenser clean. Cleanthe filter with a mild soap and water solution.Self-Contained Air-Cooled Filter2. Clean the outside of the condenser (bottom of aremote condenser) with a soft brush or a vacuumwith a brush attachment. Clean from top to bottom,not side to side. Be careful not to bend thecondenser fins.3. Shine a flashlight through the condenser to checkfor dirt between the fins. If dirt remains:A. Blow compressed air through the condenser finsfrom the inside. Be careful not to bend the fanblades.B. Use a commercial condenser coil cleaner.Follow the directions and cautions supplied withthe cleaner.4. Straighten any bent condenser fins with a fin comb.Straighten Bent Condenser Fins5. Carefully wipe off the fan blades and motor with asoft cloth. Do not bend the fan blades. If the fanblades are excessively dirty, wash with warm, soapywater and rinse thoroughly.! WarningDisconnect electric power to the ice machine andthe remote condenser at the electric service switchbefore cleaning the condenser.! CautionThe condenser fins are sharp. Use care whencleaning them.SV1608AIR FILTER! CautionIf you are cleaning the condenser fan blades withwater, cover the fan motor to prevent waterdamage.CONDENSERSV1515FIN COMB“COMB”DOWNONLY