Makita UC3030A Owner's And Safety Manual

Also see for UC3030A: Spare parts list Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita UC3030A Owner's And Safety Manual Manual pdf 8 page image

89 86Position the guide bar (7) and push it against the sprocket(6).Mounting the guide bar and saw chainPut the electric chain saw on a stable surface and carry out thefollowing operations for mounting the bar and chain:Release chain brake. To do this, pull the hand guard (1) in thedirection of the arrow.Flip up the sprocket guard quick tightener (2) (see also Fig.G).Push in the sprocket guard quick tightener firmly against springpressure, and slowly turn it counter-clockwise until you feel itengage. Keep pushing in, and turn it as far as possible coun-ter-clockwise.Release the sprocket guard quick tightener (remove pressure)and now turn it clockwise to its original position. Repeat thisprocedure until the sprocket guard (3) is unscrewed.Pull the sprocket guard (3) up slightly, pull out of the rear fit-tings (4) and remove.ABCDPlace the saw chain (9) on the sprocket (6). Using your righthand, guide the saw chain into the upper guide groove (8) ofthe guide bar.The cutting edges of the saw chain on the top of the guidebar must point in the direction of the arrow!PUTTING INTO OPERATIONCAUTION: When working on the guide bar or saw chainalways wear protective gloves and pull out thepower supply plug.CAUTION: Switch on the electric chain saw only after hav-ing assembled it completely and inspected!123476