Makita PDC1500 Instruction Manual

Also see for PDC1500: Instruction manual Instruction manual

20 ENGLISHTROUBLESHOOTINGBefore asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,do not attempt to dismantle the tool, machine, or unit. Instead, ask Makita Authorized Service Centers, always usingMakita replacement parts for repairs.State of abnormality Main power lamp Cause RemedyThe tool or machine doesnot start.- The charger is connected to theunit.Remove the charger from the unit.The lamp lights up ingreen.The adapters are not installed to thetool or machine.Install the adapters to the tool ormachine.Check that the adapters areinstalled securely.The tool or machine, or the cords ofthe adapters are overheated.Cool down the tool or machine, unitand adapter. After cooling down,power off and then power on again.The tool or machine, or the unit isbroken.Ask Makita Authorized ServiceCenters for repair.The lamp blinks in green. The plug of the adapter or powertool/machine and the socket of thebattery are not connected.Connect the plug and the socket.Check that the plug and socket areconnected securely.The unit is overheated, or thetemperature of the unit is low.Cool down the unit, or warm upthe unit.The remaining battery capacity isnot enough.Charge the battery.The lamp blinks in red andgreen alternately.The unit has detected anabnormality.Turn off the unit, and then back on.The tool or machine, or the unit isbroken.Ask Makita Authorized ServiceCenters for repair.The lamp does not light up. The unit is not turned on. Turn on the unit.The remaining battery capacity isnot enough.Charge the battery.The unit is broken. Ask Makita Authorized ServiceCenters for repair.Charging does not startwhen the charger isconnected.The lamp blinks in red. The unit is overheated, or thetemperature of the unit is low.Cool down the unit, or warm upthe unit.The lamp blinks in red andgreen alternately.The unit or charger has detected anabnormality.Remove the socket of the batterycharger, and then connect it again.The unit or charger is broken. Ask Makita Authorized ServiceCenters for repair.The lamp does not light up. The charger is not connected to theproper AC voltage source.Connect the charger to the properAC voltage source.The socket of the charger is notconnected properly.Connect the socket of the chargerproperly.The power cord of the charger is notconnected to the charger properly.Connect the power cord to thecharger properly.The unit or charger is broken. Ask Makita Authorized ServiceCenters for repair.OPTIONALACCESSORIESCAUTION: These accessories or attachmentsare recommended for use with your Makita prod-uct specified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory or attachmentfor its stated purpose.If you need any assistance for more details regard-ing these accessories, ask your local Makita ServiceCenter.• Makita genuine charger• Adapters for 36 V (18 V x 2)• Adapter for 36 V - 40 V max• Shoulder harnessNOTE: Some items in the list may be included in theproduct package as standard accessories. They maydiffer from country to country.