Makita LS1016 Instruction Manual

Also see for LS1016: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

22screw which secures the pointer and adjust thepointer so that it will point to 0°.1230095252. Bevel anglePush the latch lever forward fully to release the positivestops.(1) 0° bevel angle123009512Push the carriage toward the guide fence andtighten the locking screw clockwise and pullthe lock lever towards the front of the saw tosecure the carriage. Lower the handle fullyand lock it in the lowered position by pushingin the stopper pin. Loosen the lever at the rearof the tool.Turn the hex socket bolt on the right side ofthe arm holder two or three revolutionscounterclockwise to tilt the blade to the right.123009511Carefully square the side of the blade with thetop surface of the turn base using thetriangular rule, try-square, etc. by turning thehex socket bolt on the right side of the armholder clockwise. Then tighten the leversecurely.123001819Make sure that the pointers on the arm holderpoint to 0° on the bevel scale plate on the arm.If they do not point to 0°, loosen the screwswhich secure the pointers and adjust them sothat they will point to 0°.12009490(2) 45° bevel angle123 4009608Adjust the 45° bevel angle only afterperforming 0° bevel angle adjustment. Toadjust left 45° bevel angle, loosen the leverand tilt the blade to the left fully. Make surethat the pointer on the arm holder points to45° on the bevel scale on the arm. If thepointer does not point to 45°, turn the left 45°bevel angle adjusting bolt on the side of thearm until the pointer points to 45°.To adjust right 45° bevel angle, perform thesame procedure described above.1. Pointer2. Scale plate3. Left 45 ﾟ bevelangle adjustingbolt4. Right 45 ﾟ bevelangle adjustingbolt1. Bevel scaleplate2. Pointer1. Triangular rule2. Saw blade3. Top surface ofturn table1. 0 ﾟ Angleadjusting bolt2. Lever3. Latch lever1. Pointer2. Lever3. Bevel scale plate1. Screw2. Pointer3. Miter scale

/ 76

Related manuals for Makita LS1016

Makita LS1016 Instruction Manual

This manual is suitable for:

LS1016 LS1016L

Makita LS1016 Instruction Manual

Product

Learn More

Legal