Makita LS0714N Instruction Manual

Also see for LS0714: Instruction manual Instruction manual Instruction manual Parts Breakdown Instruction manual

8SPECIFICATIONSModel LS0714 / LS0714F / LS0714FL / LS0714LBlade diameter 190 mmBlade body thickness 1.3 mm - 2.0 mmHole (arbor) diameter 20 mmMax. Miter angle Left 47°, Right 57°Max. Bevel angle Left 45°, Right 5°Max. Cutting capacities (H x W) with blade 190 mm in diameter.Bevel angleMiter angle 45° (left) 0° 5° (right)* 45 mm x 265 mm Note 1 * 60 mm x 265 mm Note 1 -----0° 40 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm* 45 mm x 185 mm Note 2 * 60 mm x 185 mm Note 245° (left and right) 40 mm x 212 mm 52 mm x 212 mm -----* 60 mm x 145 mm Note 357° (right) ----- 52 mm x 163 mm -----(Note)* mark indicates that a wood facing with the following thickness is used.1: When using a wood facing 20 mm thick.2: When using a wood facing 15 mm thick.3: When using a wood facing 10 mm thick.No load speed (min -1) 6,000Laser Type (LS0714FL/L) Red Laser 650 nm, 1 mW (Laser Class 2)Dimensions (L x W x H) 670 mm x 430 mm x 458 mmNet weight LS0714: 13.1 kg, LS0714F: 13.4 kg, LS0714FL: 13.7 kg, LS0714L: 13.5 kg• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END228-1SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ DOUBLE INSULATION･ To avoid injury from flying debris, keepholding the saw head down, aftermaking cuts, until the blade has come toa complete stop.･ When performing slide cut, first pullcarriage fully and press down handle,then push carriage toward the guidefence.･ Do not place hand or fingers close to theblade.･ For your safety, remove the chips, smallpieces, etc. from the table top beforeoperation.･ Always set SUB-FENCE to left positionwhen performing left bevel cuts. Failureto do so may cause serious injury tooperator.･ To loosen the bolt, turn it clockwise.･ Never look into the laser beam. Directlaser beam may injure your eyes.･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of the European Directive,on Waste Electric and ElectronicEquipment and its implementation inaccordance with national law, electricequipment that have reached the end oftheir life must be collected separatelyand returned to an environmentallycompatible recycling facility.