Makita LS0714 Technical Information

Also see for LS0714: Instruction manual Instruction manual Instruction manual Parts Breakdown Instruction manual

7. Lift up the jig until it reach the pan head screw M5x16 of laser box side. See Fig. 20-4.8.Adjust the laser line so as to parallel the line of jig by turning hex socket set screw M4x6 (B). See Fig. 20-7.Hex socket setscrew M4x6 (B)Be sure to hex wrenchclockwise and slowly inorder to avoid backlashof screw.Laser boxLaser line adjusted so as toparallel the line of jigFig. 20-79. In order to move the laser line onto the line of jig for laser line adjustment, slide the position of thumb screw M5x24to left or right as Fig. 20-8. Finally driveThumb screw M5x24 to fix the laser section.Thumb screw M5x24Line of jig forlaser line adjustment (1R315)Laser line alignedwith the line of jigFig. 20-8Line of jig for laser lineadjustment (1R315)R epairP 19/ 26