Makita LS0714 Technical Information

Also see for LS0714: Instruction manual Instruction manual Instruction manual Parts Breakdown Instruction manual

For safety and easy adjusting work, remove saw blade, safety cover section, flanges (outer and inner) and dustnozzle.1. Mount Jig for laser line adjustment (1R315) to spindle. See Fig. 20-2.2. Tear away a part of laserline label until hex socket head set screws M4x6 (A and B) come into your sight as Fig.20-5.3. Connect the machine with power source, and turn on the switch of laser. See Fig. 20-5.4. Slide the position of thumb screw M5x24 to the center point for the movable range in order to reserve the adjustmentrange to be wide. After that, drive the thumb screw M5x24 to fix the laser section.Fig. 20-5Fig. 20-6(3) Adjustment of laser beam positioning (exclusively for LS0714FL/ LS0714L)Switch oflaser beamSlide the position ofthumb screw M5x24to the center point forthe movable range.Laser line label5. Lower the jig until it reaches the pan head screw M5x16 of link plate side. See Fig. 20-3.6. Move the laser line to the closest position to the line of jig by adjusting with hex socket set screw M4x6(A).See Fig. 20-6.Laser line at the closestposition to the line of jig.Line of jigHex socket setscrew M4x6 (A)Be sure to turn hex wrenchclockwise and slowly inorder to avoid backlash.Hex socket setscrew M4x6 (A)Hex socket setscrew M4x6 (B)R epairP 18/ 26