Menu
Makita DCU180 Instruction Manual
Also see for DCU180: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                      |
14 ENGLISHFully pull down the lever and checkthat the carrier or bucket is locked.Do not change the direction on steepslopes.Load and unload objects on flatground.Load objects on the carrier or bucketevenly.This machine cannot be used on thepublic road.Do not use for transporting persons.Do not expose to rain.To cancel the beep sound, releasethe switch trigger and pull the brakelever.Do not stare into beam.Guaranteed sound power levelaccording to EU Outdoor NoiseDirective.Sound power level according toAustralia NSW Noise ControlRegulationIntended useThe machine is intended for loading and carryingobjects with battery powered assistance.NoiseThe typical A-weighted noise level determined accord-ing to EN62841-1:Sound pressure level (L pA ) : 70 dB(A) or lessUncertainty (K) : 3 dB(A)The noise level under working may exceed 80 dB (A).NOTE: The declared noise emission value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared noise emission value(s) mayalso be used in a preliminary assessment of exposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which thetool is used especially what kind of workpiece isprocessed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841-1:Work mode: operation without loadVibration emission (a h ) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s2NOTE: The declared vibration total value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared vibration total value(s) may alsobe used in a preliminary assessment of exposure.WARNING: The vibration emission duringactual use of the power tool can differ from thedeclared value(s) depending on the ways in whichthe tool is used especially what kind of workpieceis processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).EC Declaration of ConformityFor European countries onlyThe EC declaration of conformity is included as Annex Ato this instruction manual.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications providedwith this power tool. Failure to follow all instructionslisted below may result in electric shock, fire and/orserious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Battery powered wheelbarrow safetywarnings1. While operating the machine, always wearnon-slip and protective footwear. Non-skid,closed-toed safety boots and shoes will reduce therisk of injury.2. Inspect pathway before hauling objects/mate-rials. Familiarizing yourself with the pathway andensuring it is wide enough to safely navigate themachine under load will help reduce losing controlof the machine. |
Related manuals for Makita DCU180
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved