Makita AN923 Instruction Manual

Also see for AN923: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

9 ENGLISH12► 1. Trigger lock 2. Change leverWhen the tool is not to be used for an extended periodof time, lubricate the tool using pneumatic tool oil andstore the tool in a safe place. Avoid exposure to a directsunlight and/or humid or hot environment.Maintenance of the compressor, airset and air hose1► 1. Drain cock1► 1. Air filterAfter operation, always drain the compressor tank andthe air filter. If moisture is allowed to enter the tool,It may result in poor performance and possible toolfailure.Check regularly to see if there is sufficient pneumaticoil in the oiler of the air set. Failure to maintain sufficientlubrication will cause O-rings to wear quickly.12► 1. Oiler 2. Pneumatic oilKeep the air hose away from heat (over 60°C, over140°F), away from chemicals (thinner, strong acids oralkalis). Also, route the hose away from obstacles whichit may become dangerously caught on during operation.Hoses must also be directed away from sharp edges andareas which may lead to damage or abrasion to the hose.