Makita AN923 Instruction Manual

Also see for AN923: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

6 ENGLISHASSEMBLYCAUTION:• Always lock the trigger and disconnect the hosebefore carrying out any work on the tool.Loading the nailerSelect nails suitable for your work. Insert strip of nailsinto the magazine.Load nails so that they get parallel to the driver guide.1► 1. PusherPull the pusher lever to the rear to engage the pusherto the last nail.Unloading the nailer312► 1. Pusher lever 2. Depress 3. ReturnPull the pusher lever to the rear. Return the pusherlever back while keeping the pusher depressed to dis-engage it from the strip of nails.Depress the nail stopper and remove the strip of nailsfrom the magazine.1► 1. Nail stopperConnecting the air hose1 2► 1. Air socket 2. Air fittingLock the trigger. Slip the air socket of the air hoseonto the air fitting on the nailer. Be sure that the airsocket locks firmly into position when installed ontothe air fitting. A hose coupling must be installed on ornear the tool in such a way that the pressure reservoirwill discharge at the time the air supply coupling isdisconnected.