Makita AN923 Instruction Manual

Also see for AN923: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

5 ENGLISH1► 1. Pneumatic tool oilFUNCTIONALDESCRIPTIONCAUTION:• Always lock the trigger and disconnect the hosebefore adjusting or checking function on thetool.Nose adapter (Accessory)CAUTION:• Always lock the trigger and disconnect the hosebefore installing or removing the nose adapter.When nailing workpieces with easily-marred surfaces,use the nose adapter.Attach the nose adapter to the contact arm.12► 1. Contact arm 2. Nose adapterAdjusting depth of nailing1AB► 1. AdjusterTo adjust the depth of nailing, turn the adjuster. Thedepth of nailing is the deepest when the adjuster isturned fully in the A direction shown in the figure. It willbecome shallower as the adjuster is turned in the Bdirection. If nails cannot be driven deep enough evenwhen the adjuster is turned fully in the A direction,increase the air pressure. If nails are driven too deepeven when the adjuster is turned fully in the B direction,decrease the air pressure. Generally speaking, the toolservice life will be longer when the tool is used with alower air pressure and the adjuster set to a lower depthof nail driving.CAUTION:• Always lock the trigger and disconnect the hosebefore adjusting the depth of nailing.Installing the hook1► 1. HookCAUTION:• Always lock the trigger and disconnect the hosefrom the tool.• Never hook the tool at high location or on poten-tially unstable surface.The hook is convenient for hanging the tool temporarily.To use the hook, simply lift up hook until it snaps intothe open position.When not in use, always lower hook until it snaps intothe closed position.