I NSTALL THE SERVER STEP 1A: QUICK START SETUP PROCEDURESM86 S ECURITY INSTALLATION G UIDE 25Non-Quick Start procedures or settingsThe options described below do not pertain to the quick start setup process.Reboot systemA. From the Quick Start menu, press B to go to the Reboot confirmation screen.B. At the Really reboot the system? prompt, press Y to continue, or press anyother key to cancel reboot.Change Quick Start passwordA. From the Quick Start menu, press C to go to the Change Administrator Pass-word screen.NOTE: This option will change the password used for accessing the Quick Start menu (thedefault password being #s3tup#r3k) but will not change the password used for accessingthe ER console login screen. Option D, “Reset admin console account”, should be usedfor resetting the Web Filter Administrator console username and password to the factorydefault ‘admin’/’user3’ and for unlocking all IP addresses currently locked.B. At the Enter the new administrator password prompt, type in the new pass-word to be used for accessing the Quick Start menu and press Enter.C. At the Re-enter the new administrator password prompt, re-type the pass-word you just entered and press Enter, or press Esc to cancel the change.Reset admin console accountA. From the Quick Start menu, press D to go to the Reset admin GUI accountconfirmation screen that displays the following message:Reset admin account password? Are you sure?NOTE: This process will also unlock the admin account and unlock all currentlylocked IPs.NOTE: This option resets the Web Filter Administrator console username and password tothe factory default ‘admin’/’user3’ and will unlock all IP addresses currently locked.B. Press Y to continue, or press any other key to cancel admin account reset.
