PRELIMINARY SETUP PROCEDURES G ENERAL SAFETY I NFORMATIONM86 S ECURITY INSTALLATION G UIDE 13AC Power Cord and Cable PrecautionsWARNING:• The AC power cord for the server must be plugged into a grounded, poweroutlet.• Do not modify or use a supplied AC power cord if it is not the exact type requiredin the region where the server will be installed and used. Replace the cord withthe correct type.• Route the AC power cord and cables away from moving parts and foot traffic.• Do not allow anything to rest on the AC power cord and cables.• Never use the server if the AC power cord has been damaged.• Always unplug the AC power cord before removing the unit for servicing.Electrical Safety PrecautionsWARNING:Heed the following safety precautions to protect yourself from harm and the serverfrom damage:CAUTION: Dangerous voltages associated with the 100-240 V AC power supply arepresent inside the unit. To avoid injury or electrical shock, do not touch exposed connec-tions or components while the power is on.• To prevent damage to the server, read the information in this document forselection of the proper input voltage.• Do not wear rings or wristwatches when troubleshooting electrical circuits.• To avoid fire hazard, use only the specified fuse(s) with the correct type number,voltage, and current ratings. Only qualified service personnel should replacefuses.• Qualified service personnel should be properly grounded when servicing theunit.• Qualified service personnel should perform a safety check after any service isperformed.
