Lenovo C360 NT Hardware Maintenance Manual

Also see for ideaCentre C360: Hardware Maintenance Manual

Administrator PasswordSetting an Administrator Password deters unauthorized persons from changing configuration settings. Youmight want to set an Administrator Password if you are responsible for maintaining the settings of severalcomputers.After you set an Administrator Password, a password prompt is displayed every time you access the LenovoBIOS Setup Utility program.If both the Administrator and Power-On Password are set, you can type either password. However, you mustuse your Administrator Password to change any configuration settings.Setting, changing, or deleting an Administrator passwordTo set an Administrator Password, do the following:Note: A password can be any combination of letters and numbers up to 16 characters (a-z and 0-9). Formore information, see “Password considerations” on page 13.1. Start the Lenovo BIOS Setup Utility program (see “Starting the Lenovo BIOS Setup Utility program” onpage 13).2. From the Security menu, select Set Administrator Password and press the Enter key.3. The password dialog box will be displayed. Type the password then press the Enter key.4. Re-type the password to confirm, then press the Enter key. If you typed the password correctly,the password will be installed.To change an Administrator Password, do the following:1. Start the Lenovo BIOS Setup Utility program (see “Starting the Lenovo BIOS Setup Utility program” onpage 13).2. From the Security menu, select Set Administrator Password and press the Enter key.3. The password dialog box will be displayed. Type the current password then press the Enter key.4. Type the new password, then press the Enter key. Re-type the password to confirm the new password.If you typed the new password correctly, the new password will be installed. A Setup Noticed confirmingthat changes have been saved will be displayed.To delete a previously set Administrator Password, do the following :1. From the Security menu, select Set Administrator Password and press the Enter key.2. The password dialog box will be displayed. Type the current password and press the Enter key.3. To delete an Administrator Password, leave each new password line item blank, then press the Enterkey. A Setup Notice confirming that changes have been saved will be displayed.4. Return to the Lenovo BIOS Setup Utility program menu and select the Exit option.5. Select Save changes and Exit from the menu.Power-On PasswordWhen a Power-On Password is set, you cannot start the Lenovo BIOS Setup Utility program until a validpassword is typed from the keyboard.Setting, changing, or deleting a Power-On PasswordNote: A password can be any combination of letters and numbers up to 16 characters (a-z and 0-9).14 Lenovo C360–365 NT All-In-One ComputerHardware Maintenance Manual