Step 1. Align the bottom of the panel to the slot on the bottom of the cabinet frame, and pivot the top of thepanel towards the cabinet frame.Figure 48. Installing the side panelStep 2. Insert the key and turn it clockwise to secure the panel to the cabinet frame.Removing, installing and reversing the doorsFollow the instructions in this section to remove, install, and reverse the doors.Remove the doorFollow the instructions in this section to remove the cabinet door.AAbboouutt tthhiiss ttaasskkNote: For safety, this task must be done by two people.1. If necessary, insert the key and turn it clockwise to unlock the door.2. Pull the lower end of the handle up and clockwise; then, open the door.42 ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide