Lenovo 7D2C User Manual

Also see for 7D2C: User guide

CastersS037CAUTION:The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained persons, a liftingdevice, or both to safely lift this part or unit.Complete the following steps to move the cabinet to the designated site:Step 1. Make sure the leveling feet are all up. If not, complete the following procedure on each of theleveling feet.a. Loosen the nut that fixes the leveling foot.Figure 6. Loosening the nutb. Insert the open end of the combination wrench in the hardware box (see 4 in “Hardware box”on page 6) into the screw above the leveling foot, and turn it counterclockwise until it no longermakes contact with the floor.Note: Make sure to shorten the cabinet feet enough to allow the cabinet to slide on the rampwithout getting stuck.Chapter 4. Moving the rack cabinet 9