Lenovo 410556U - Topseller S20 Twr W3520 2.66G 4Gb 500Gb Dvdrw Wvb User Manual

Contents

• To use recovery media on Windows 7 or Windows Vista, do the following:Attention: When you use recovery media to restore the computer to the factory default settings onWindows 7 or Windows Vista, all the files currently on the system drive or the hard disk drive will bedeleted and replaced by the factory default settings.1. Depending on the type of your recovery media, connect your boot medium (memory key or USB harddisk drive) to your computer, or insert the boot disc into your CD or DVD drive.2. Restart your computer.3. Repeatedly press and release the F12 key when turning on the computer. When the Startup DeviceMenu window opens, release the F12 key.4. Depending on the type of your recovery media, select the proper startup device and press Enter.After a short delay, the Product Recovery program opens.5. Follow the instructions on the screen. After restoring the computer to the factory default settings,you might have to reinstall some software programs or device drivers. See “Installing or reinstallingdevice drivers” on page 37 for details.• To use Product Recovery discs on Windows XP, do the following:Attention: When you use Product Recovery discs to restore the computer to the factory default settingson Windows XP, all the files currently on the hard disk drive will be deleted and replaced by the factorydefault settings. During the restore process, you will be given the option to save one or more files currentlyon the hard disk drive to other media before the data is deleted.1. Insert the boot disc into your CD or DVD drive.2. Restart your computer.3. Repeatedly press and release the F12 key when turning on the computer. When the Startup DeviceMenu window opens, release the F12 key.4. Select the CD or DVD drive as the startup device and press Enter. After a short delay, the Rescueand Recovery workspace opens.5. From the Rescue and Recovery menu, click Restore your system.6. Follow the instructions on the screen.Performing backup and recovery operationsThe Rescue and Recovery program enables you to back up all your hard disk drive contents including theoperating system, data files, software programs, and personal settings. You can designate where theRescue and Recovery program stores the backup:• On a protected area of your hard disk drive• On a secondary hard disk drive installed in your computer• On an attached external USB hard disk drive• On a network drive• On recordable CDs or DVDs (a recordable CD or DVD drive is required for this option)After you have backed up the contents on the hard disk drive, you can restore the complete contents of thehard disk drive, restore only the selected files, or restore only the Windows operating system and applications.Performing a backup operationThis section provides instructions on how to perform a backup operation using the Rescue and Recoveryprogram on different operating systems.34 ThinkStation User Guide