Lenovo 30FM002VUS User Manual

2. Restart the computer. When the logo screen is displayed, press F12 or Fn+F12.3. Select the storage device as desired and press Enter.If you want to change the boot priority order permanently, select Enter Setup on Startup Device Menu andpress Enter to enter the BIOS menu.Enable or disable the configuration change detection featureIf you enable configuration change detection, when the POST detects configuration changes of somehardware devices (such as storage drives or memory modules), an error message will be displayed when youturn on the computer.To enable or disable the configuration change detection feature:1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.2. Select Security ➙ Configuration Change Detection and press Enter.3. Enable or disable the feature as desired.4. Press F10 or Fn+F10 to save the changes and exit.To bypass the error message and log in to the operating system, press F2 or Fn+F2. To clear the errormessage, enter the BIOS menu, save and then exit.Enable or disable the automatic power-on featureThe Automatic Power On item in UEFI BIOS provides various options for you to make your computer start upautomatically.To enable or disable the automatic power-on feature:1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.2. Select Power ➙ Automatic Power On and press Enter.3. Select the feature as desired and press Enter.4. Enable or disable the feature as desired.5. Press F10 or Fn+F10 to save the changes and exit.Enable or disable the smart power-on feature (for selected models)Ensure that the keyboard is connected to a USB connector supporting the smart power-on feature. With thesmart power-on feature enabled, you can start up or wake up the computer from the hibernation mode bypressing Alt+P.To enable or disable the smart power-on feature:1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.2. Select Power ➙ Smart Power On and press Enter.3. Enable or disable the feature as desired.4. Press F10 or Fn+F10 to save the changes and exit.Enable or disable front and rear USB portsIf you need to enable or disable any front or rear USB port in UEFI BIOS, refer to below table to locate thecorresponding USB port on your computer.Chapter 5. UEFI BIOS 23