|
9: ServicesSpider™ and SpiderDuo® KVM-over-IP Device User Guide 90Event Log Assignments3. Do one of the following:a. Click Save to save settings.b. Click Reset to Defaults to restore system defaults.c. Click Reset to restore original settings.SNMPThe Spider device has an internal SNMP agent that has various objects accessible in its MIB. Italso can generate traps based on events. The Spider device permits enabling or disabling theSNMP agent, input read and write communities, location information, contact information, andviewing the MIB.To configure SNMP settings, perform the following steps.1. Click Services > SNMP. The SNMP Settings page displays.SMTP Logging enabled With this option, the Spider device is able to send emails to an address givenby the email address. These emails contain the same description strings asthe internal log file and the mail subject contains the event class. To use thislog destination, specify an SMTP Server, the Receiver Email Address, andSender Email Address. Enter the mail server and SMTP port as:.SNMP Logging Enabled If selected, the Spider device sends an SNMP trap to a specified destinationIP address every time a log event occurs. Configure the Destination IP andCommunity. View the SNMP MIB implemented in the Spider device byclicking on the Spider device SNMP MIB link.Field DescriptionEvent Log Assignments Select the event classes for monitoring, local logging, and exportation.Field Description
|
