7: InterfacesSpider™ and SpiderDuo® KVM-over-IP Device User Guide 67USB Mouse TypeMouse Speed3. View the USB Status for USB Speed, Keyboard, Mouse, and Mass Storage.4. Do one of the following:a. Click Save to save settings.b. Click Reset to Defaults to restore system defaults.c. Click Reset to restore original settings.To configure the Spider device USB model with a Sun Solaris operating system, perform thefollowing steps.1. Click Interfaces > Keyboard/Mouse. The Keyboard/Mouse Settings page displays.2. On the Keyboard/Mouse Settings page configure the red outlined fields as shown.3. The Sun Solaris operating system requires the keyboard to send a country code to use acertain language. At Country Code click enabled and use the Country drop- down list toselect your language choice.Note: Sun Solaris settings are for the Spider device only.4. Click Save.Field Descriptiondown menu>Different operating systems running on the target system require differentmouse emulation protocols. One selection is available for newer versions ofWindows and Mac OS/X, and another for Other Operating Systems (e.g.,Linux).Field DescriptionMouse speed Select the method of assigning mouse speed. Auto mouse speed determines the speed and acceleration settings of thetarget system. It is the recommended setting for most applications. Fixed scaling translates a one-pixel motion on the client system to aselectable number of pixels moved on the target system. As the 1 to nmapping is linear, this will only work when there is no compressionacceleration or other special effects turned on at the target system.
