KitchenAid KDTE334DSS Installation Instructions Manual

Contents

KitchenAid KDTE334DSS Installation Instructions Manual Manual pdf 4 page image

4Location RequirementsDishwasher must be fully enclosed (top, sides, back, and floor)upon installation. A side panel kit is available from your dealer forinstalling your dishwasher at the end of your cabinetry.An optional moisture barrier accessory is also available forinstalling underneath a wooden countertop. See the “Tools andParts” section at the front of the guide for part details and orders.Check location where dishwasher will be installed. The locationmust provide:■ Convenient access for loading and unloading dishes. Cornerlocations require a 2" (5.1 cm) minimum clearance betweenthe side of the dishwasher door and the wall or cabinet.■ Easy access to water, electricity and drain.■ Grounded electrical supply required.■ Make sure pipes, wires and drain hose are within theshaded area shown in the “Product and Cabinet OpeningDimensions” section.■ Do not run drain lines, water lines or electrical wiringwhere they can interfere with or contact dishwasher motoror legs.■ Shelter dishwasher and water lines leading to dishwasheragainst freezing. Damage from freezing is not covered bythe warranty.NOTE: If dishwasher will be left unused for a period of time orin a location where it may be subject to freezing, have itwinterized by authorized service personnel.■ A square opening for proper operation and appearance.■ The cabinet front to be perpendicular to floor.■ A level floor.Helpful Hint: If floor at front of opening is not level with floor atrear of opening, shims may be used to level dishwasher.NOTE: To avoid shifting during dishwasher operation, shimsmust be securely attached to the floor.■ The location where the dishwasher will be installed mustprovide clearance between motor and flooring. Motor shouldnot touch the floor.■ Do not install dishwasher over carpeted flooring.