Menu
Kitchen Living Juice Extractor User Manual
                | |
8AFTER SALES SUPPORT 866-235-5029 mp656@messageplex.com HL-2098A, 01/14, 6339Getting StartedBefore first use• Unpack the appliance but keep all packaging materials until you have made sure your new juiceextractor is undamaged and in good working order. Plastic wrapping can be a suffocation hazardfor babies and young children, so ensure all packaging materials are out of their reach.• Fully unwind the cord and inspect it for damage. Do not use the appliance if anything has beendamaged. In such a case, contact our after sales support line for advice on examination, repair orreturn of the damaged product.• Read this manual to familiarise yourself with all the parts. Pay particular attention to the safetyinstructions on the previous pages.• Make sure the appliance is disconnected from the power supply.• Holding the rim of the filter with you fingers, lift the stainless steel filter out of the juice collector.Then lift the plastic juice collector off the motor unit.• Wash all detachable parts with a soft cloth or sponge in warm water and a little washing-updetergent to remove any dust or other remnants from the manufacturing process.CAUTION! Take care to avoid injury from the sharp blades at the bottom of the filter.• Rinse the parts with clean water and dry.• When all parts are thoroughly dry, assemble the unit as follows.Assembly• Place the juice collector into the appliance — see (1) in Fig. 1 below.• Tilt the motor unit slightly to attach the pulp container to the appliance, fitting the top endunderneath the pulp spout first, then lining up the bottom end — see (2) in Fig. 1 below.1. |
Related manuals for Kitchen Living Juice Extractor
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved