9AFTER SALES SUPPORT 866-235-5029 mp656@messageplex.com HL-2098A, 01/14, 6339Getting Started (Cont.)• Put the filter back into the juice collector, making sure it sits securely in place over the drive shaft— see Fig. 2 below. (You should be able to move it around but not lift it out easily.)• Place the lid with feeding tube on top of the appliance — see Fig. 2 above.• Snap the safety clamp onto the lid to lock it into place — see (1) in Fig. 3 above.• Slide the pusher into the feeding tube by aligning the groove in the pusher with the smallprotrusion on the inside of the feeding tube — see (2) in Fig. 3 above. Make sure the safetyclamps are securely locked on either side of the lid.• Place the juice jug under the spout — see Fig. 4 below.• Place the lid on top of the juice jug to avoid splattering, or if you want to store the juice in therefrigerator — see Fig. 5 below.2. 3.4. 5.