4. Unload inspectionsInspections stored in the analyser can be unload on the computer :➢ Connect the analyser to the computer thanks to the supplied USB cable and turn on the analyser.➢ Launch Ligaz software.➢ Connect the analyser to the LIGAZ software clicking on “Kigaz” menu then click on “Connect device”.The software indicates that connexion is successful.➢ Click on “Kigaz” menu then on “Unload kigaz”.The software recovers inspections contained in the analyser. This operation can take a few minutes.At the end of the recovery, the following window is displayed :➢ Tick the corresponding boxes to the inspections to unload on the computer.➢ Click on “Download selected inspections” button.A message indicates that transfer is in progress then the message “Transfer done” is displayed : inspectionshave been well transferred.➢ Click on OK.The “Total database” window is displayed with the transferred inspections.42 Unload inspectionsnetzerotools.comnetzerotools.com
