Kimo Kigaz-150 User Manual

Contents

Kimo Kigaz-150 User Manual Manual pdf 16 page image

➢ Select “Day/Month” to display the day then the month or “Month/Day” to display the month then the day thenpress OK.➢ Go to “Time Format” with up and down arrows then press OK.➢ Select the time format : “12” or “24”.If 12 is selected, “AM” for ante meridiem or « PM » for post meridiem will be displayed in front of the time.➢ Press the “Validate” function key to quit the screen and save the modifications or press Esc to cancel.4.1.5. Set the printing of tickets“Settings instrument” screen is displayed.➢ Go to “Printing” with up and down arrows then press OK.➢ Go to “Format” with up and down arrows then press OK.➢ Select the ticket format : long or short with up and down arrows then press OK.Long format ticket : prints measurement results + header (operator name, date and time of the inspection, type ofinstrument and its serial number, address, telephone number.Short format ticket : prints only the measurement results and the instrument reference.➢ Go to “Header” then press OK.The keyboard appears at the bottom of the screen.➢ Select the letters with the arrows then press OK.➢ Press the function key to validate the header.The keyboard disappears.Press Esc to back to “Settings instrument” screen and validate modifications.• To go from lower-case keyboard to upper-case keyboard then to numeric keyboard : press the function key .• To erase a letter : press the function key .4.1.6. Activate or deactivate the visual helpThe visual help corresponds to help windows displayed met during a measurement procedure.“Settings instrument” screen is displayed.➢ Go to “Help” with up and down arrows.➢ Press OK to activate it : ON or to deactivate it : OFF.4.2. Set the combustible15 different combustibles are recorded in the analyser :Sahara / Fos Natural gas Cannel-coalGroninguen – Natural gas Low volatile coalRussia – Natural gas Coke gasPropane Biofuel 5%LPG Wood 20%Butane Hog fuel 21%Light oil Pellet 8%Heavy fuel oil4.2.1. Modify a combustibleEach combustible has its own coefficient allowing to calculate loses and efficiencies in the most accurate way.The modification of these coefficients will lead some modifications in combustion analysis results. Onlya qualified technician is authorized to modify them.It is still possible to reset the factory parameters pressing “Factory” or with Ligaz software. (see page48).“Settings” menu is displayed.➢ Go to “Combustibles” with up and down arrows then press OK.16 Set the different parameters of the analysernetzerotools.comnetzerotools.com