Keysight N1911A Programming Manual

Also see for N1911A: User guide Installation guide Configuration guide

Contents

Keysight N1911A Programming Manual Manual pdf 712 page image

15 SERVice Subsystem712 N1911A/1912A P-Series Power Meters Programming GuideSERVice:SENSor[1]|2:FREQuency:MINimum?This query returns the minimum frequency that can be measured by the currentlyconnected sensor. It is applicable to E-Series sensors only. Minimum frequencyinformation is stored in the sensor’s EEPROM.SyntaxExampleError Messages– If no sensor is connected, error –241, “Hardware missing” occurs.– If a a sensor other than an E-Series sensor is connected, error –241 “Hardwaremissing” occurs.– If the E-Series sensor currently connected does not contain the necessaryinformation in EEPROM, error –241 “Hardware missing” occurs.SERV:SENS1:FREQ:MIN? This query returns the minimum frequencythat can be measured by the E-Series sensorcurrently connected to Channel A.:FREQ ?:MINSERV 12:SENS