Keys Fitness Triumph 8.3 Treadmill TRI-8.3t Owner's Manual

Contents

Keys Fitness Triumph 8.3 Treadmill TRI-8.3t Owner's Manual Manual pdf 17 page image

Calibration SequenceOur treadmill is equipped with a software package that will perform a calibration sequence unique to yourspecific model number. Please perform the following steps to calibrate the Triumph 8.3t Treadmill.1. Unplug power cord from outlet strip.2. Attach Safety Key to console.3. Plug power cord into outlet strip.4. Initiate calibration sequence. Locate hole on the back of the console and insert the eraser end of a pencilthrough the hole and press the calibration switch twice. As show on page 14.5. CL21 should appear in the Time window, if not, continue to press the calibration switch until CL21appears.Note: During the calibration sequence, the Time window will display which step you are at in the process(C21, C22, C23 and so on). The CAL/DIST window will display which key should be entered next. For exam-ple, “E” for Enter, “P” for Power, or “SS” for Start / Stop.6. CL21: MPH or KPH will be flashing in the Speed window, pressing the Speed +/ - button will toggleoptions. Choose MPH (KPH), press Enter.7. CL22: 8, 10, or 12 (13, 16, or 20 in KPH mode) will be displayed in the Speed window, pressing the Speed+/ - button will toggle options. Choose 10 (or 16 for KPH mode), press Enter.8. CL23: FFF, UUU, or HHH will be displayed in the Speed window, pressing the Speed +/ - button will tog-gle options. Choose UUU, press Enter.9. CL24: 111 or 222 will be displayed in the Speed window, pressing the Speed +/ - button will toggleoptions. Choose 222, press Enter.10. CL25: AL1 or AL2 will be displayed in the Speed window, pressing the Speed +/ - button will toggleoptions. Choose AL2, press Enter.11. CL26: OPA or OPI will be displayed in the Speed window, pressing the Speed +/ - button will toggleoptions. Choose OPA, press Enter.12. CL27: Blank (nothing), “a”, “b”, “c”, or “d” will be displayed in the Incline window, pressing the Speed+/ - button will toggle options. Choose Blank, press Enter.13. CAL/DIST window will display “E”, Press Enter. “55” will display in CAL/DIST window.14. Press Start/ Stop.15. At this time, make sure you are not standing on the walking belt, as the machine will automatically initiatebelt movement and run through a complete calibration and diagnostic routine.Press Enter, belt will begin to move, unit will begin self-calibration.16. When Speed and Incline calibration has finished, press Power button twice, display should blank, andtreadmill should be ready for use.T o avoid possible damage to the treadmill and the possibility of injury, do not operate thetreadmill until the problem is corrected. Call Keys Technical Service at (888) 340-0482.17

/ 20

Related manuals for Keys Fitness Triumph 8.3 Treadmill TRI-8.3t