Keurig K4000 Operation And Maintenance

Also see for K4000: Daily Cleaning Tasks

Contents

Keurig K4000 Operation And Maintenance Manual pdf 26 page image

English426Make sure that the end of thetube cut in a "V" shape is the oneinserted in the container withwater and descaling solution.Place a container under the dispensing spout.Start selection (for ex. 12 oz cappuccino) to introduce thedescaler into the circuit of the machine.Repeat this step until the container with water anddescaling solution is empty.Rinse the brewer hydraulic circuit by inserting the tube ina container filled with water and repeating the selection(for example 12 once cappuccino) for six times.After the rinsing, disconnect the tube used for descalingand reconnect in its original position the one previouslydisconnected .After completing the descaling cycle, empty the containersused to collect the liquids during descaling.The descaling solution is tobe disposed of accordingto the manufacturer’sinstructions and/or theregulations in force in thecountry of use.4.10 PREPARING THE BREWER FORSTORAGE OR TRANSPORTWhen the brewer is not going to be used for a long periodof time, it is advisable to:1. Power it off and unplug it2. Disconnect the brewer from the water supplyIt is also advisable to turn off the brewer each day whennot in use for energy saving.4.10.1 Empty Water SystemWith no K-Cup® pod in place, proceed to empty thewater system in the following way:1. Close the water supply tap;2. Place a 12 oz. or larger ceramic mug on the drip tray.3. Enter settings menu with the proper password andselect “Drain System”.