Keurig K4000 Operation And Maintenance

Also see for K4000: Daily Cleaning Tasks

Contents

Keurig K4000 Operation And Maintenance Manual pdf 2 page image

English2IMPORTANT SAFEGUARDSSafe Operation & UseWhen using electrical appliances, basic safety precautions should be followed,including the following:1. Read all instructions before using.2. Do not touch hot surfaces. Use handles and knobs when available.3. This appliance must be properly installed and located in accordance with theseinstructions before it is used.4. The use of accessory attachments not recommended by the appliancemanufacturer may result in fire, electrical shock, or injury to persons.5. Do not place on or near a hot gas or electric burner, or in a heated oven.6. Do not use outdoors.7. To protect against fire, electric shock, and injury do not immerse cords, plugs,or the appliance in water or any other liquid.8. Turn off and unplug the brewer before cleaning or maintenance. Allow to coolbefore putting on or taking off parts and before cleaning the appliance.9. For best operation, plug the appliance into its own electrical outlet on adedicated circuit to prevent flickering of lights, blowing of fuses, or tripping acircuit breaker.10. Do not operate any appliance with a damaged cord or plug or after theappliance malfunctions or is damaged in any manner. Contact Keurig CustomerService to report any malfunction of or damage to the brewer.11. Do not let the cord hang over the edge of the table or counter, or touch hotsurfaces.12. To disconnect, press the Power Switch on the brewer to “OFF” status andthen remove the plug from the wall outlet.13. Close supervision is necessary when any appliance is used by or nearchildren.14. Do not lift the Handle while brewing is in progress.15. This appliance is equipped with a Power Cord having a grounding wire with agrounding plug. The appliance must be grounded using a 3-hole properlygrounded outlet. In the event of an electrical short circuit, grounding reduces therisk of electrical shock.16. If the outlet is a standard 2-prong wall outlet, it is your personal responsibilityand obligation to have it replaced with a properly grounded 3-prong wall outlet.