Keurig K4000 Café System—Daily Cleaning TasksDaily — Quick CleanPerform daily for optimal performance1. Place an empty 12oz cup on the drip tray2. Select "Quick Clean" from the main menu3. Choose Brew Line Wash4. Repeat steps, but chooseSoluble Line WashTurn off the brewer. Remove the nozzle cover housing by sliding it forward out of the holder (A). Pull down toremove the milk nozzle (B). Uncap the milk nozzle for cleaning and sanitizing (C).To reinstall, replace the milk nozzle, and slide the cover housing back into its holder.Daily — Removing Milk Nozzle for Cleaning & SanitizationWeekly — Removing the Mixing Bowl and Powder HoppersA B CLift the hopper cover. Start by rotating spouts on the powder hoppers to the horizontal position (1). Pushforward then lift up the powder hoppers (2). Next, disconnect the milk tube from the front of the mixing bowl(3) and unlock the mixing bowl by turning the green tab to the right (4). Pull out the mixing bowl. Set asidethe mixing bowl and empty powder hoppers for cleaning and sanitizing.To reinstall, reassemble the mixing bowl parts and slide the assembled bowl back into its original position.Lock the mixing bowl by rotating the green tab all the way to the left. Reconnect the milk tube to the mixingbowl by pushing the milk tube about ½’’ onto its connector. Replace the powder hoppers. Close the hoppercover.1 2 3 4Turn over for Cleaning & Sanitization instructions →