I General User Manual 29Installing the shifting cable with hub gears› Bring the cable around to the cassette joint pulley,hold so that the inner cable fixing nut is facing tothe outside (toward the dropout), and then slidethe flats part of the inner cable fixing washer intothe gap in the pulley.Flats part of the innercable fixing washerGap in pulleyInner cablefixing nutPulleyCJ-8S20JAPANLOCK› Turn the cable 60° anticlockwise and attach it onthe hook.CJ-8S20JAPANLOCKTurn thecable 60°Hook› Attach the inner cable to the pulley as shown in theillustration, pass the inner cable through the slit inthe cassette joint bracket, and then insert the endof the outer casing securely into the outer casingholder.CJ-8S20JAPANLOCKCJ-8S20JAPANInner cableBracketOuter casing holderSlitPulleyBracket121 Pass through the slit2 Insert into the outer casing holder› If first inserting the outer casing into the outercasing holder is easier, then first insert the outercasing into the outer casing holder, and the insert a2 mm Allen key or a # 14 spoke into the hole in thecassette joint pulley, and then turn the pulley sothat the inner cable fixing bolt unit fits into the gapin the pulley.CJ-8S20JAPANLOCK123Hole in pulley2 mm Allen keyor # 14 spoke1 Insert into the outer casing holder2 Turn the pulley3 Insert the inner cable fixing bolt unit
