Menu
KENT Razor PlusD28 Instructions For Use Manual
                                                                                                            | |
Contents
| 
Razor™ Plus D24 - D28 - C28 9097698000(1)2008-04 13INSTRUCTIONS FOR USE ENGLISHBEFORE MACHINE START-UPP100302WARNING!When the machine is to be started by turning the ignition key (80) to “I”, make sure that, between the deck (18or 19) and the above tank assembly, there is no foreign material which may prevent the deck from lifting. Thisprocedure must be performed because if the machine has been turned off without lifting the deck, the deckwould lift automatically at next machine start-up.WARNING!Before turning on the deck lifting/lowering switch (71), always check that, between the deck (18 or 19) and theabove tank assembly, there is no foreign material which may prevent the deck from lifting.Brush/pad-holder deck or cylindrical brush deck installation/removalThe machine can be equipped with either the brush/pad-holder deck (18) or the cylindrical brush deck (19).For deck installation/removal see the procedure in Maintenance chapter.NOTEWhen the deck is installed/removed, it may be necessary to change the squeegee too, because they must have thesame width. For correct matching of deck and squeegee, see the Squeegee Installation paragraph.https://harrissupplyind.com - To Order Parts Call 608-268-8080 |
Related manuals for KENT 9087250020
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved