1KENT proudly presents- its new and advanceddomestic water purifier based on thepatented KENT Technology. The ground-breaking KENT Technology, developed atKENT laboratory, broadly comprises ofstate-of-the-art RO+UF+UV with TDSControl & Auto - Flushing System. Theinitial purification by RO membranehaving porosity as fine as 0.0001 micronsreduces even dissolved impurities (hardsalts, heavy metals etc.). Doublepurification by UV process ensurescomplete protection against bacteria andviruses. Moreover, the patented TDSControl System intelligently retainsessential natural minerals in purified water,thus taking total care of your health andwell being.KENT PEARLTMMineral ROKENT TECHNOLOGY - A Breakthrough inWater Purification*TMSalient Features of KENT Pearl Mineral RO Water Purifiern nnnn nn nn nnnn nSuitable for wall mounting or counter-top 8 Litres storage capacityinstallation RO Membrane fused inside membranePurification by RO+UF+UV withTDS Control housing to prevent tamperingInbuilt Auto-flushing System Vertically mounted SMPS for protectionDetachable tank for easy on-site cleaning on Push-fit components for leak-proof ®ular basis maintenance-free performanceLED indicator for power and purification display Fully automatic operation with auto-onand auto-off functionComputer-controlled operation with FilterChange Alarm* and UV Fail Alarm* ABS construction for corrosion-free lifespanAdjustable TDS Control System to allow TDS Suitable for Purification of Brackish /adjustment of purified water Tap Water / Municipal Corporation Water1.2.3.4.5.6.7.Water Purifier : 01 No.3-Way Connector : 01 No.S.S. Ball Valve : 01 No.Food Grade Pipe (Blue)- 1/4 inch. : 2.5 metersFood Grade Pipe (White)- 3/8 inch. : 2.5 metersScrews & Plastic Inserts : 02 Nos. eachInstruction Manual : 01 No.Sticker Center Drill : 01 No.TMKENT Pearl Mineral RO8.Items in the Box2* Tested & Certified by TUV-SUD South Asia (P) Ltd.Avoid exposure to directsunlight and installationin damp areas.Make sure that thepurifier is connected tonormal temperaturewater supply only.Rejected WaterDrain 10 MWater Source Water inMaximum distance between thewater source and purifier shouldnot be more than 3 meters.Avoid sharp bends in pipe.Do not block the rejectwater pipe.Do not confine thepurifier in a cabinet.In case the purifier is not tobe used for more than twodays, kindly switch off thepower supply and drain thestorage tank.Do not try to service the purifier on your own.Instead, call the service technician for help.To keep the storage tank clean, it should be removed,cleaned and wiped dry, once in 15 days.Important InstructionsMake sure that the rejectedwater pipe is not placed at a levelhigher from the purifier,otherwise rejected water mayflow backwards into the purifier.Use Genuine Kent spares for optimum performance