Menu
KENT 9087112020 Instructions For Use Manual
                                                                                            | |
Contents
| 
INSTRUCTIONS FOR USE ENGLISHRazor SV17 909 6309 000(3)2009-11 19SOLUTION FILTER CLEANINGEmpty the solution tank (32) as shown in the relevant paragraph.1.Drive the machine on a level loor.2.Make sure that the switches (65 and 66) are turned to “0”.3.Remove the transparent cover (A, Fig. 8), then remove the ilter strainer (B). Clean and install them on the support (C).4.NOTEThe ilter strainer (B) must be correctly positioned on the housing (D) of the support (C).CBABDFigure 8S310232AMACHINE SPEED ADJUSTMENTNOTEThe machine speed varies according to the type of loor to be cleaned and the choice of using the brush or the pad.If necessary, perform the following procedure.Remove the recovery tank as shown in Use chapter.1.Adjust the machine speed with the screw (53) as shown below:2.Loosen the screw (57), on the right side of the machine, by turning it counter-clockwise.•Turn the adjusting screw (53) counter-clockwise to increase the machine speed.•Turn the adjusting screw (53) clockwise to decrease the machine speed.•After adjusting, tighten the screw (57).•Install the recovery tank as shown in Use chapter.3.With the machine ready to operate, perform hands-on tests of the machine and, if other adjustments are necessary, repeat4.steps 1 to 4.https://harrissupplyind.com - To Order Parts Call 608-268-8080 |
Related manuals for KENT 9087112020
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved