Kärcher K 3.190 Manual 

Contents

Kärcher K 3.190 Manual  Manual pdf 15 page image

– 7Illustrations on Page 21 Quick coupling for high pressure hose2 High pressure connection3 Appliance switch "0/OFF“/ „I/ON“4 Storage for mains connection cable5 Storage for high-pressure hose6 Transport handle7 Storage for spray lance8 Storage for trigger gun9 Water connection with integrated sieve10 Detergent suction hose with detergentfilter and lid11 Detergent Tank12 Coupling element for water connection13 Mains cable with mains plug14 Bearing wheel15 Trigger gun16 Lock trigger gun17 Key to detach the high pressure hosefrom the trigger gun18 High pressure hose19 Spray lance with pressure regulation(Vario Power)20 Spray lance with Dirtblaster21 Washing brushSpecial accessories expand the possibili-ties of using your appliance. Please contactyour KÄRCHER dealer for further informa-tion.Mount loose parts delivered with applianceprior to start-up.Illustrations on Page 3Illustration Push the wheels into the intake. Secure the wheels using the includedplug. Align the plug properly!Illustration Insert the transport handle and screw in.Illustration Fasten the quick coupling for the highpressure hose to the high pressure con-nection.Illustration Push the high pressure hose into thetrigger gun until it locks audibly.Note: Make sure the connection nippleis aligned correctly. Check the secure connection by pullingon the high pressure hose.Illustration Pull the suction hose for detergentthrough the cover of the detergent tankuntil the filter contacts the bottom of thetank. Close the detergent tank with the lid. Lock the detergent tank in place on theappliance.According to the applicable regula-tions, the appliance must never beused on the drinking water supplywithout a system separator. Use asuitable system separator manufactured byKÄRCHER; or, as an alternative, a systemseparator as per EN 12729 Type BA. Waterflowing through a system separator is con-sidered non-drinkable.CautionAlways connect the system separator tothe water supply, never directly to the appli-ance!Note: Impurities in the water can damagethe high-pressure pump and accessories.For protection, the use of the KÄRCHERwater filter (optional accessory, order no.4.730-059) is recommended.Observe regulations of water supplier.For connection values, see type plate/tech-nical data. Use a fibre-reinforced water hose (notincluded) with a standard coupling.(Minimum diameter 1/2 inch (13 mm),minimum length 7.5 m).Illustration Screw the coupling element to the wa-ter connection on the appliance. Push the water supply hose onto thecoupling unit, then connect it to the wa-ter supply.OperationDescription of the ApplianceSpecial accessoriesBefore StartupWater supplyWater supply from mains15EN