Kärcher HDS-E 8/16-4 M Series Service Manual

Also see for HDS-E 8/16-4M: Manual User manual Manual

Contents

Kärcher HDS-E 8/16-4 M Series Service Manual Manual pdf 79 page image

English 5.906-548.0 Rev. 00 (04/12) 791 Sleeve with throttle bore2 Pump head3 Suction valve4 Suction valve (removed) Remove the suction valves using a special pliers. Check the suction valves for leaks. Insert the suction valves (observe installation po-sitioning) with greased seals. Install the suction jumper.The high pressure valves are secured with valvescrews.1 Pump head2 High pressure valve3 Valve screw4 Valve screw Unscrew the valve screws. Remove the high pressure valves using a specialpliers. Check the high pressure valves for leaks. Insert the high pressure valves (observe installa-tion positioning) with greased seals. Screw in the valve screws with new and greasedseals.1 Inlet hose2 Water fine filter3 Threaded piece Unscrew the supply line from the water fine filter. Unscrew the casing from of the water fine filter. Take out the filter sieve.1 Filter casing2 Filter sieve3 Flat seal4 Threaded piece5 Flat seal, suction jumper6.6.6 Remove the high pressure valves.6.7 Replace the water fine filter.