OneStart

Kärcher HDS-E 8/16-4M manuals

HDS-E 8/16-4M first page preview

HDS-E 8/16-4M

Brand: Kärcher | Category: Pressure Washer
Table of contents
HDS-E 8/16-4M first page preview

HDS-E 8/16-4M

Brand: Kärcher | Category: Pressure Washer
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Preface
  5. Boiler
  6. Parts of the system
  7. Rear view
  8. View from below
  9. Storage compartments
  10. View of the right side, appliance hood open
  11. Function
  12. Indicator lamps
  13. Interior of operating panel
  14. Operating panel open
  15. Control electronics
  16. Cover
  17. Service switch
  18. System care RM 110/RM 111
  19. Ventilating the reciprocating pump
  20. Remove the boiler cover
  21. Boiler models
  22. Overflow
  23. Detergent
  24. High-pressure pump
  25. Sectional illustration
  26. High pressure seal / low pressure seal
  27. Electric box 12 kW
  28. Electric box 24 kW
  29. Electric box 36 kW
  30. Hand spraygun
  31. Rotating regulator
  32. Functional diagram
  33. Pressure and volume regulation
  34. Pressure and quantity regulation at the pump
  35. Functional description of pressure switch
  36. The appliance is switched on and the gun is open
  37. Gun is closed
  38. The gun is reopened when the appliance is switched on
  39. Functional description of the control
  40. Basic settings and service procedures
  41. Changing the settings
  42. Set up the switching off process
  43. RFID query
  44. Check the temperature sensor
  45. Check the thermostat and the device switch
  46. Check the service switch
  47. Sensoren prüfen
  48. Error memory
  49. System care consumption
  50. Gun switches since the most recent gun service
  51. Gun services
  52. Gun switches since initial startup
  53. Operating hours of the heater since heater service
  54. Heater service
  55. Operating hours of the heater since the startup of the device
  56. Operating hours of the pump since pump service
  57. Pump services
  58. Operating hours of the pump since the start up of the device
  59. Overview of a quick check of the device status
  60. Maintenance intervals
  61. Adjust the rotating regulator on the pump
  62. Setting the minimum working pressure
  63. Remove the manometer
  64. Adjust safety valve
  65. Remove the pump kit
  66. Disassemble the high pressure pump
  67. Remove the piston guide and replace the oil seals
  68. Low pressure seal packages
  69. Replace high pressure seals
  70. Remove the high pressure valves
  71. Decalcify boiler
  72. Remove boiler
  73. Information for the assembly
  74. Removing the heating element
  75. Remove the rotary switch
  76. Troubleshooting
  77. Technical specifications
  78. Special tools
  79. Torques
  80. Circuit diagrams
  81. Cut-out masks to place on the operating panel