JVC VR-N900U Instructions Manual

Also see for VR-N900U: Instructions Instructions Instructions Startup guide Startup guide

Contents

81TroubleshootingSolutions to warning indicator light upProblem SolutionPower cannot be turned on. Check that the power cable has been plugged in correctly.Check that the power switch on the rear panel is switched on.Camera is not automatically detected. Follow the instructions in the camera’s user manual and check the DHCPsettings.Unable to operate the system by pressing the[REC] or [PLAY] button.Check that operation lock is not engaged.No images are recorded with recording controlmode.Check the settings in the [Camera Record Setting].Check that the scheduler is set to online.Check that the camera is in recording control mode.Unable to play back sound. Check that audio for the camera device is set to [Enable] in the [Camera RecordSetting] window.Unable to operate While holding the [FUNCTION] button of front panel, press the [OPERATE]button for more than 7 seconds to forced power OFF.CAUTION• The recorded images that are not archived ( Page 55) before forcedpower OFF may not play back properly.☞Error message Possible cause and solutionWARNING: HDD 0 (1) The HDD seems to be no longer serviceable.Replacement is recommended.Consult to your nearest JVC dealer.OVERHEATED! Check the temperature of the operating environment.Check that the fan unit operates properly.If the temperature of the operating environment is appropriate, consult toyour nearest JVC dealer.ENCODER ERROR(format) Abnormality with the input signal.Check the entered image signal.ENCODER ERROR (xxx) Other abnormality.Consult to your nearest JVC dealer.

/ 82

Related manuals for JVC VR-N900U