JVC VR-N900U Instructions Manual

Also see for VR-N900U: Instructions Instructions Instructions Startup guide Startup guide

Contents

71Log In to the VR-N900 Viewer1 Double-click the [VR-N900 Viewer] shortcut onyour desktop.If the [VR-N900 Viewer] desktop shortcut is not shown,select the [VR-N900 Viewer] from Windows’ [Start] menuThe [VR-N900 Viewer] log in window will appear.2 Specify your login information in the followingfields.Server address:Type the IP address and port number of the VR-N900U.(example: http://192.168.1.253:80, where :80 is the port number.)Type the IP address specified in the [Server Configuration]section of the Image Server settings.Authentication:Lets you select between three types of authentication.Select [Basic authentication].Windows authentication (current user) with which youwill be authenticated through your current Windows login.Windows authentication with which you will beauthenticated through your Windows login, but you willneed to type your Windows user name and password.Basic authentication, with which you must specify a username and password for accessing the VR-N900U. Whenyou log in to VR-N900U for the first time, select [Windowsauthentication].User name: vr-n900Password: vr-n900User name:If using [Windows authentication], type your Windows username. If using [Basic authentication], type your surveillancesystem user name as defined in the [User Administration]of the Image Server settings. ( Page 64)Password:If using [Windows authentication], type your VR-N900Ulogin password. If using [Basic authentication], type yoursurveillance system password exactly as defined in the[User Administration] of the Image Server settings. (Page 64 )Remember password:When using [Windows authentication] or [Basicauthentication], you have the option of selecting[Remember password], in which case you can simply click[Connect] the next time you want to log in.Auto-login:If selected, you will automatically be logged in to the VR-N900 Viewer.To modify the login information when [Auto-login] is set,click [Cancel] to modify the login information.3 Click [Connect].After a while, the [VR-N900 Viewer] window will open.Note• If you have logged in before, the VR-N900 Viewer will askyou if you want to keep the view(s) you last used.(Only for access from a surveillance computer)Main View:If the check box is selected, the view you last used in theVR-N900 Viewer’s main window will be restored.Detached Views:If check box is selected, the views you last sent to[Primary Display], secondary displays and floatingwindows will be restored.☞☞