JVC VR-N900U Instructions Manual

Also see for VR-N900U: Instructions Instructions Instructions Startup guide Startup guide

Contents

Basic Operation20Adjusting the Playback Speed (Jog/Shuttle Playback)You can adjust the playback speed by turning the jog dial/shuttle dial on the front panel.Shuttle Playback• Rotate the shuttle dial during playback or when playback ispaused to start fast forward, fast reverse or slow playback.■ The playback speed indications when performing fastforward or fast reverse playback by rotating the shuttledial are approximate. The speed may differ depending onthe conditions, such as the playback mode (multi-view,single view) and the recording mode (motion detection,recorded frame rate).Jog Playback• Rotate the jog dial to play back frame-by-frame.• Rotate the dial clockwise to play back a single frame inthe forward direction, and rotate the dial counterclockwiseto play back a single frame in the reverse direction.• Release the dial to pause the playback. However, whenframes are played back successively in the forward orreverse direction, playback may continue momentarilyafter the jog dial is released.CAUTION• The jog dial will not work when no camera is selected.• When the playback speed is modified or playing back at highspeed while recording, the frame rate of the recording maydecrease. Observe the performance meter while adjustingthe playback speed.Using SequencesSequences refers to sequences of images recorded whenan event or motion is detected. You can refer to the list ofrecorded images for each sequence.1 Double-click the [Sequences] bar in the[Browse] window.2 Click the [Get Sequences] button.• A list of 20 sequences prior to and following the point intime displayed in the view will appear.• If the [Preview] check box is selected, you are able toquickly view each sequence by placing the mouse pointerover the required sequence in the list.3 Click a sequence in the list.All images in the view move to the time of the sequence.Note• Clicking the expand icon (+) next to a sequence in the listwill show you the exact date and time of the first and lastimage in the sequence as well as the exact date and timeof the motion detection, event, etc. triggering the recording.CAUTION• There are times when the continuous multiple sequenceschange into one sequence depending on [Pre/postrecordings on motion/event] setting. ( Page 29)Displaying the Alerts ListThe [Alerts] section lets you view a list of recorded images foreach alert, such as when motion is detected. ( Page 54)1 Double-click the [Alerts] bar in the [Browse] window.2 Click the [ ] of the Alerts list and select therequired event or events in the Alerts list.You may select either a single event or all events on acamera/particular server.3 Click the [Get List] button.This will display a list of detected events.FFREVStillx1x2x5x10x20x1/20x1/5x1x2x5x10x20x1/20x1/5Jog/Shuttle dialShuttle dial (Outside)Jog dial (Inside)[Browse] window[Sequence] barSequence☞☞Events list[Alerts] list[Browse] window[Alerts] bar