JVC RM-LP25U Instructions Manual

Also see for RM-LP25U: Instructions Instructions

17For specifying the white balance settings.Automatic Adjustment1 Set [WHITE BALANCE MODE] to �AW AB or �AWBB.2 Press [AUTO WHITE] (push once).� The [AUTO WHITE] indicator lights up in orange.� Auto white balance adjustment is performed and the valuestored in the camera.� After the value is successfully stored, the [AUTO WHITE]indicator turns green.Note:� When error occurs during the automatic adjustment, the[AUTO WHITE] indicator lights up in green after blinking inorange for about 5 seconds. Identify the cause of the error(lighting, filter settings, or object) and adjust again.� The error cause is displayed on the viewfinder of thecamera. For details on the display, refer to[INSTRUCTIONS] of the connected camera.3 Fine-tune the R- and B-gain values whenevernecessary.� Press [WHITE PAINT], and use the [WHITE PAINT R/B]knob to fine-tune the R- and B-gain values.Memo:� You can store different R- and B-gain values afteradjustment separately in �AW AB and �AW BB.Note:� The adjustable range of the �RB and �BB knobs may varyaccording to the color temperature difference of theobject.Manual Adjustment1 Select �MANUALB under [WHITE BALANCEMODE].2 Adjust the white balance value manually usingthe [WHITE PAINT R/B] knob.White Balance AdjustmentSetup:� Set the [BARS] button to �OFFB.� Place a white object near the center of the screen underthe same lighting conditions as the target subject andzoom in to fill the screen with white.� Set the optical filter of the camera according to the colortemperature.BLACKCOMPRESS STRETCHWHITE BALANCE MODEWHITE PAINTRRBLACK PAINTBBPAINTPAINTAUTO WHITEAUTO BLACKMANUAL PRESET FAW AW A AW BSelectLitBLACKCOMPRESS STRETCHWHITE BALANCE MODEWHITE PAINTRRBLACK PAINTBBPAINTPAINTAUTO WHITEAUTO BLACKMANUAL PRESET FAW AW A AW BWHITE PAINT LitBLACKCOMPRESS STRETCHWHITE BALANCE MODEWHITE PAINTRRBLACK PAINTBBPAINTPAINTAUTO WHITEAUTO BLACKMANUAL PRESET FAW AW A AW BWHITE PAINTSelectAdjustmanually