Listening to radio broadcasts16* For the number button usage, refer to “Using thenumber buttons” on page 12.■ IMPORTANT• Slide the remote control modeselector to [AUDIO].AM stations are spaced 9 kHz apart in some coun-tries and 10 kHz in other countries.■When the main unit is turned offTo select 10 kHz spacing, while holding down¢, press F on the main unit to turn on thepower. “10K STEP” appears in the display win-dow.To select 9 kHz spacing, while holding down4, press F on the main unit to turn on thepower. “9K STEP” appears in the display win-dow.NOTE• When the spacing is switched, the preset radiostation memory is erased.1 Press [FM/AM] to select “FM” or“AM” in the display window.• Pressing [FM/AM] selects a radio broadcastas the sound source.• Repeatedly pressing [SOURCE] on themain unit can also select a radio broadcastas the source.• Each time you press [FM/AM], the band tog-gles between “FM” and “AM”.Example: When an FM radio broadcast isreceived(Continued on the next page)Numberbuttons *Remote controlmode selectorSetting the AM tuner spacingSelecting a radio stationFrequencyStereo indicatorPreset number(Refer to page 17.)Listening to radio broadcastsNX-F3_NX-F7[A]EN.book Page 16 Tuesday, April 22, 2008 1:55 PM
